qinuo
Posts 2
|
In our daily life, due to various reasons, many people have lost the garage door remote control, which has caused a series of troubles. Generally, the garage door remote control is rarely broken, and some are just missing codes, some are just out of power, if the remote control drops, there is no way, you can only re-match one. Do you know how to code the garage door remote control? Let us teach you how to do it.
At present, the garage door remote control is mainly connected to the garage door in a wireless way. Generally, a fixed code or a rolling code is used. Since the code of each brand of garage door remote control is different, the easiest way to obtain it is to consult the production manufacturers. However, the frequency of the garage door remote control on the general market is 433.92MHZ or 315MHZ. Normally, the remote control has three buttons, but there are also two-button remotes;
First, prepare the remote control that needs to be coded, press the code key of the door opener, which is usually behind the motor, press and hold for 1-2 seconds, the indicator light keeps on, press the button on the remote control, the red light on the device and the door opener are on at the same time. Press 2-4 times (different door openers have different times). If the two red lights are on at the same time 2-4 times, the code pairing is successful;
When the code matching process is over, the indicator light should be off. If the code matching indicator light is always on at this time, it means that it is still in the code matching state, and it is likely to be equipped with other remote controls, which will cause future use. Automatic door opening and closing in the middle cause unnecessary losses, so after completing the code matching, you must pay attention to pressing the code key to exit.
edited by qinuo on 29.12.2021
|